Professional Extension Piano Tuning Hammer with Hardwood Handle

About this item:

• PROFESSIONAL TUNING HAMMER: The professional piano tuning hammer has a threaded end on it so that you can remove the head and change to a different head and tip combination. Designed with a star-shaped head, which allows for universal use across piano tuning pins.
• HEAD ANGLES AND TIPS: The extent to which the handle extends out from the tuning pins is determined by the angle of the head. Five, ten, and fifteen degree head angles are available. The tuning hammer will be closest to the tuning pins when the head angle is 5 degrees, while the 15 degree angle will extend the handle further away. The #2 star tip is made to fit square-headed tuning pins. Except for pianos with particularly short tuning pins, it will fit most tuning pins. The #1 size tip is a little smaller and is intended for smaller than normal tuning pins (mostly found on very old, European pianos).
• DESIGN: 9" solid hardwood handle and steel extension rod for up to a maximum length of 14".
• HEAD AND TIP OPTION: Standard one piece head and tip is 2-1/2" long with a #2 size tip. The two piece head and tip includes a 1-1/4" head and a 1" long #2 tip (Choose head & tip option above)
• EXCHANGEABLE HEAD AND TIP: Comes with your choice of an exchangeable one piece head and tip or a two piece head and tip ($10 additional for two piece head & tip)

Product Description:

This tool is made in the USA with high quality parts and quality craftsmanship that is hard to match. The manufacturer has been making piano tuning hammers and piano tools since 1938 and takes great pride in manufacturing only the best tools that are available.

Specifications:             

• Product Type: Tuning Hammer
• Head Angle: 5, 10 and 15 degree
• Handle Length: 9 inch
• Handle Material: Solid Hardwood Handle
• Extension Rod Material: Steel
• Extension Rod Length: 14" Maximum Length